XP DEUS 2 11" FMF- RC- WSA-ll
XP WSA-ll Included
A new revolution!
XP once again pushes the boundaries by creating the DEUS II, the first wireless, multi-frequency metal detector with unique features and performance. Once the disc, the remote control, the headset, and the pinpointer are paired, these elements communicate with each other wirelessly and without any latency thanks to our proprietary radio protocol. The measurements of the disk are thus instantly returned to the headphones, giving the DEUS II unrivaled precision. The DEUS II is ultra-efficient on all terrains and in all conditions, both on land and at sea, thanks to FMF® (Fast Multi Frequency) technology, simultaneous multi-frequency technology with rapid restitution.
Choose the Fast and simultaneous Multi Frequency programs or between 49 single frequencies from 4 to 45 kHz. The above graphic Illustrates the sensitivity and the iron discrimination capability depending on frequency and the advantage of Fast Multi Frequency programs covering a large spectrum of targets. This is only a basic schematic which can vary depending the programs and real terrain conditions.
20M WATERPROOF
Made in France by XP, it is waterproof IP68 - 20 m so that you can dive with your Deus 2.
S-Telescopic Stem
The first telescopic and ergonomic S-Stem.
This new patented stem provides instant storage and greater maneuverability than conventional stems with added grips.
Ergonomics has been studied by our research department. Our designers have developed a rubber grip designed to fit the shape of your hand and an improved grip angle.
Telescopic: Store your detector in 5 seconds.
Collapse the stem of your detector and store it in your backpack in just a blink of an eye.
Once folded, your detector will only measure 65 cm in length (equipped with a 9" coil).
Ergonomic, it adapts to your desired search height but remains adjustable at any time
XP 9'' FMF Coil
FMF®: Fast and simultaneous Multi Frequency 22.5cm (9”) coil, from 4 to 45 kHz.
Compatible with the DEUS II.
Choose the Fast and simultaneous Multi Frequency programs or between 49 single frequencies from 4 to 45 kHz.
*This graphic Illustrates the sensitivity and the iron discrimination capability depending on frequency and the advantage of Fast Multi Frequency programs covering a large spectrum of targets. This is only a basic schematic which can vary depending the programs and real terrain conditions.
Specifications
-
Wireless FMF® Fast and simultaneous multi frequency coil
-
49 frequencies: from 4 to 45 kHz
-
Wireless Coil battery life: up to 20H depending on programs and frequencies
-
Weight: 345 gr
-
Fully waterproof up to 20 meters
-
Supplied with coil cover, screwing kit and lower stem
-
5 Year warranty (design to last)
-
Made in France
XP DEUS II Remote Control
12 factory programs to suit all terrains in all conditions!
The control module, also known as the remote control or RC allows you to adjust the internal settings of your DEUS II. It can be fixed on the stem or stored in a pocket – The remote control is not required if you choose to use the WS6 headphones as a master to control your detector.
XP CONNECTOR MULTI-FEATURES
-
Battery level
-
Update software
-
Wired headset (optional)
-
Bone conduction headphones BH-01 (optional)
IP68: Certified for submersion up to 20M, waterproofing and pressure resistance guaranteed
WATERPROOF UP TO 20M/66FT
ALL TERRAIN
SHOCKPROOF
Cap setup
-
GREY PLUG No. 1 = 1m max. This is the plug for common use on land or for a submerged remote control up to 1m.
-
RED PLUG No. 2 = 20m max. For underwater use only. Make sure to replace it by the grey plug once back on land.
The remote control can be clipped and unclipped in 2 seconds...
A simple thumb press on the bottom of the remote control is all it takes.
Programs
The 12 factory programs + 12 user programs
DEUS II has the advantage of offering a wide range of programs suitable for all ground and search conditions.
-
GENERAL: FMF • Max. freq. 40khz • Conductive soil subtraction. GENERAL uses low and high frequencies and gives an excellent assessment of targets in the soil. It suits both beginners and experienced users. It offers an excellent target/false signal ratio in the ground, as it rejects the moisture in the soils, which can cause halos and false sounds when passing over holes, for example. You will therefore have more confidence on deep targets. This damp / wet soil subtraction thus attenuates the very low electric conductors like coke (coal, and conductive stone) and to a lesser extent certain very thin targets like aluminum foil.
-
SENSITIVE: FMF • Max. freq. 40khz • Frequency addition. SENSITIVE uses low and high frequencies up to 40 kHz. Highly efficient on all targets, it will be very effective in mineralized and polluted ground when searching for the smallest targets.
-
SENSI FT: FMF • Max. freq. 40khz • Frequency addition. SENSITIVE FULL TONES is based on the same platform as Prg. 2 - SENSITIVE, but it is configured with Full Tone audio mode, with Reactivity at 3 instead of 2.5. It offers a very rich and informative sound identification that requires a little more experience, as each target index generates a different tone in proportion to conductivity (see Discri > Full Tones). Very efficient in highly-polluted ferrous and mineralized ground.
-
FAST: FMF • Max. freq. 40khz • Frequency addition. FAST is based on the same platform as Prg. 2 - SENSITIVE, but the audio is set to Pitch mode with Reactivity at 3 instead of 2.5 and uses the square audio feature. These three settings combined allow the machine to work fast in ferrous-polluted and mineralized ground.
-
PARK: FMF • Max. freq. 24khz • Frequency addition. PARK is adjusted for searching recreational area’s such as, parks, dry sand beach, etc., sites that are normally polluted.
-
DEEP HC: FMF • Max. freq. 14khz • Frequency addition. DEEP HIGH CONDUCTOR adds together very low and medium frequencies up to 14 kHz. Designed to better locate good conductivity targets, it is ideal for clusters of coins whilst maintaining excellent sensitivity to isolated coins using its 14 kHz frequency.
-
DEUS MONO: MONOFREQUENCY adjustable from 4 to 45kHz. DEUS MONO works on a single frequency like 1, but combines the advantages of DEUS II, such as its expanded frequency range to 45 kHz, improved performance, audio quality, better EMI rejection, etc. There is more likelihood of connecting with an unstable frequency while using several simultaneous frequencies than with just one and the DEUS MONO could help you in these situations.
-
GOLD FIELD: FMF • Max. freq. 40khz • Frequency addition. GOLD FIELD is intended for highly-mineralized gold-bearing ground. Gold nuggets are often seen as the ground or ferrous items in these tricky environments. It is set to “all metal” for deeper detection and only rejects the localised ground to which you should regularly adjust by Grabbing (see Ground). It will accept ground above and below your Ground setting.
-
RELIC: FMF • Max. freq. 24khz • Frequency subtraction. RELIC is processed in the same way as Prg. 8 - GOLD FIELD, but uses lower subtracted frequencies to search for large masses. It is configured for “all metal” with low Reactivity and only rejects the localised ground to which you should regularly adjust by Grabbing (see Ground). It will then accept ground above and below this ground setting.
-
DIVING: FMF • Max. freq. 14khz • Conductive soil subtraction. DIVING is the first and most stable of three programs intended for submerging in saltwater environments or simply on wet sand. Its very low and medium subtracted frequencies will better locate valuable targets such as rings and coins, whilst naturally being less responsive to low conductive targets like aluminum foil compared to the more sensitive Beach 11 and 12 programs. It can thus save time and be more effective in difficult diving conditions.
-
BEACH: FMF • Max. freq. 24khz • Conductive soil subtraction. BEACH uses higher frequencies up to 24 kHz and thus is more sensitive to small targets compared to Diving. It is well suited to wet zones.
-
BEACH SENS: FMF • Max. freq. 40khz • Conductive soil subtraction. BEACH SENS incorporates frequencies up to 40 kHz offering excellent sensitivity to the smallest targets without losing performance on bigger targets. This is the deepest beach program for wet conditions but also the most reactive.
-
MI-6 connection
-
Wireless Remote Control battery life up to 30H depending on audio output activated
-
Designed to last: 5 year warranty, and more
-
Made in France
WSA II helmet
Wireless neck headphones, rainproof, foldable, compact, lightweight, compatible with DEUS II.
The WSA II is a sophisticated wireless receiver headset. Made in France by XP especially for our detectors. It works with the DEUS II remote control or with the WS6 Master, ie when the WS6 is used as a command.
XP's wireless protocol is about 10 times faster than low-latency Bluetooth. In the field, this ultra-fast transmission results in better location of targets.
Detachable control module to connect a wired headset
(optional) or easily change the headband of the headset
Once paired with the remote control or the WS6 Master, it switches on and off automatically (Manually press - to switch on, + and – simultaneously to switch off). If no connection is detected, the headphones turn off after 5 minutes.
Its volume can be adjusted either from the remote control (or the WS6 Master), or directly using the + - keys.
It also incorporates 4-band audio equalization processing, always adjustable from the remote control (or the WS6 Master), in order to adapt it to your hearing.
Battery level: After the rapid ignition flashes, the headset indicates its battery level by 1 to 3 long successive flashes depending on the state of its battery: 3 flashes correspond to a 100% battery level. 2 flashes, 60% and 1 flash, 30%.
Technical characteristics
- Lightweight: 72g
- Foldable, easy to carry
- Rainproof: rainproof
- Lithium battery guaranteed for 2 years
- Sound level adjustable on 10 levels
- Multiple audio options: PWM, SQUARE, and more to come
- 4 band equalizer
- Audio frequency range 20~20,000 Hz
- RF frequency range 2.400Ghz to 2.480Ghz (communication frequency range between elements)
- Automatic switching on and off after pairing with the master element (remote control or WS6)
- Auto-off 5min, if the helmet is switched on and there is no master element
- Auto-off 5h, if no manipulation of the remote control keyboard or the WS6 (each press of a key restarts a 5h timer)
- Quick charge in USB format: 2 hours
- Headset charge status indicator LED
- Guaranteed 5 years
- Made in France
Whats in the box?
XP Deus 2 Metal Detector
XP Deus 2 Remote Control
XP WSA-ll Headphones
XP 11" FMF
+++
XP Deus 2 with 11 Inch FMF-RC-WSA-ll
- Brand: XP Metal Detectors
- Product Code: XP Deus 2 Metal Detector with RC-11 inch FMF-WSA-ll Headphones
- Availability: In Stock
-
$1,549.00