Minelab GPZ 7000 Metal Detector 

 

A Super-D coil consists of a central transmit winding and two outer receive windings. The GPZ 19 coil has isolated suspension windings that are less prone to mechanical vibration noise.

The GPZ 19 coil (19" × 18") has 53% more area than the GPZ 14 coil (14" × 13"). It’s perfect for wide open spaces and covers more ground in less time.

Larger coils typically detect deeper than smaller coils of the same configuration. Minelab field test results, in both low and high mineralised ground, using a range of natural gold nuggets, give an average 30%* detection depth increase when measuring performance of the extra large GPZ 19 coil compared to the standard GPZ 14 coil. 

---

 

PRECISION GROUND BALANCE

Most gold is buried in the mineralised ‘difficult’ ground that many detectors can’t cope with. The GPZ 7000 accurately ‘balances’ and automatically ‘tracks’ to even the most severe ground conditions, with ease.

ENHANCED NOISE IMMUNITY

The outstanding noise immunity of the GPZ 7000 enables very smooth and quiet detecting. With 256 Noise Cancel channels, the GPZ 7000 picks up less atmospheric noise. Listen to the gold, not the noise interference!

SIMPLE MENU SYSTEM

The easy-to-use Menu Pages group similar functions together under Detect and Map sections, with all settings quickly accessible. Use the Guide Sequences to get started. You don’t need to be an expert to find gold!

Detect without your headphones attached to the detector. With the WM 12 Wireless Module you have the choice of using the in-built speaker, the supplied headphones, or your favourite headphones.

See your location and log gold finds as you detect. With the built-in GPS you’ll efficiently cover more ground and won’t miss a nugget! Record your favourite ‘hot-spots’ by saving data to XChange 2 with Google Maps.

The GPZ 14 coil is waterproof and submersible to a depth of 1 m (3 ft). You can easily detect rivers and shorelines with no fuss! The weatherproof design of the GPZ 7000 allows you to go detecting in rainy or wet conditions.

 

 

---

 

ZVT TECHNOLOGY

 ZVT

 

So how deep can you go? Well, up to 40%* deeper than the GPX series. Old gold fields are new again, thanks to the revolutionary new ZVT technology. Minelab takes you much deeper than ever before with a detector that can be used for getting that gold from places thats been hunted out by other machines.. Go deeper than most other machines out there.. A detector that has been tried and tested by folks from all over the world. It has been very effective in finding gold in gold fields through out the world.

 

Comes with all you see here

 

Minelab GPZ 7000 

Now you can go deeper, and it's possible to find the gold that has been missed over and over again.   

Ultra High Performance

Very Versatile Detecting

---

Extreme Gold Depth So how deep can you go? Well, up to 40%* deeper than the GPX series. Old gold fields are new again, thanks to the revolutionary new ZVT technology. Minelab takes you much deeper than ever before! Maximum Gold Sensitivity The incredible sensitivity of the GPZ 7000 with the Super‑D coil gives you the ultimate advantage in the field.

Find gold others have missed, from sub-gram gold through to those elusive ‘retirement nuggets’ still out there. Precision Ground Balance-Most gold is buried in the mineralized ‘difficult’ ground that many detectors can’t cope with. The GPZ 7000 accurately ‘balances’ and automatically ‘tracks’ to even the most severe ground conditions, with ease.

Enhanced Noise Immunity The outstanding noise immunity of the GPZ 7000 enables very smooth and quiet detecting. With 256 Noise Cancel channels, the GPZ 7000 picks up less atmospheric noise.

Listen to the gold, not the noise interference!

* When compared to the average performance of the GPX 5000 in typical environments. Actual performance depends on prevailing conditions. Simple Menu System The easy-to-use Menu Pages group similar functions together under Detect and Map sections, with all settings quickly accessible. Use the Guide Sequences to get started.

You don’t need to be an expert to find gold!

Wireless Audio Freedom Detect without your headphones attached to the detector. With the WM 12 Wireless Module you have the choice of using the in-built speaker, the supplied headphones, or your favourite headphones. 

GPS Locating & PC Mapping-See your location and log gold finds as you detect. With the built-in GPS you’ll efficiently cover more ground and won’t miss a nugget! Record your favorite ‘hot-spots’ by saving data to XChange 2 with Google Maps.

Waterproof Coil to 1 m (3 ft)‡ The GPZ 14 coil is waterproof and submersible to a depth of 1 m (3 ft). You can easily detect rivers and shorelines with no fuss! The weatherproof design of the GPZ 7000 allows you to go detecting in rainy or wet conditions. 

‡ GPZ 7000 detector is weatherproof only. GPZ 14 coil is fully waterproof to 1 m (3 ft). WM 12 is not waterproof or weatherproof.

 

 

 

MAXIMUM GOLD RECOVERY – Detector Comparison With extreme depth and maximum sensitivity, the GPZ7000 outperforms both the SDC2300 and the GPX5000.

* When compared to the average performance of the GPX 5000 in typical environments. Actual performance depends on prevailing conditions. The information displayed in this graph is an out-of-the-box comparison, is indicative only, and is based on the results of laboratory measurements and field testing undertaken by, and for, Minelab using a GPX 5000 with the 11" Monoloop coil, an SDC 2300 with attached 8" Monoloop coil and a GPZ 7000 with the GPZ 14 Super-D coil. The nominal performance for GPX 5000 with the 11" Monoloop coil is used as the baseline for comparison of the other detectors. The performance of the GPX 5000 on larger nuggets with a larger comparable accessory 15" x 12" Monoloop coil is also depicted. Note that a GPZ 7000 with a GPZ 14 coil will also typically further outperform a GPX 5000 with larger accessory coils on small and medium nuggets. Please be aware that the depicted results give a relative and realistic comparison of the three detectors for typical goldfields conditions for detecting the weight ranges of gold shown, but do not represent performance under all conditions, and should not be regarded as conclusive. Minelab does not warrant or represent that the performance levels depicted will actually be achieved, as performance of the three detectors will vary depending upon prevailing conditions. Relevant factors in detector performance include, but are not limited to, detector settings, coil size and configuration, ground type, mineralisation levels and type, electromagnetic interference, gold nugget size, shape and composition, and operator skill level.

---

GOLD DETECTING MADE EASY – Key Gold Settings Simply set the GOLD MODE and GROUND TYPE to suit your detecting conditions and you’re ready to go.

Gold Mode 

High Yield- (default setting) (Typically ≤ 0.1–50 grams) This mode excels at detecting small to medium nuggets. It will also perform very well when hunting larger nuggets. Start with this very sensitive mode for the top layer of ground.

General- (Typically 5–50 grams) An all-rounder mode that seeks out small to large nuggets in equal measures at greater depth, without sacrificing too much sensitivity. Use this mode after covering a patch in High Yield mode.

Extra Deep- (Typically ≥50 grams) A specific mode for detecting very large, deep targets. This mode will punch deeper than all other modes, taking you to the NEXT LEVEL of gold detection up to 40%* deeper than GPX detectors. 

Ground Type

Normal- For soils that have lower levels of mineralization, this mode will maximize target response signals. If the detector is noisy over the ground then switch to Difficult. This is a great mode for deep cache hunting.

Severe- Some locations have extreme levels of mineralization. This ground type, combined with High Yield gold mode, enables detecting in challenging conditions for recovering gold from previously undetectable areas.

Difficult-(default setting) Goldfields typically have very mineralized soil. This mode handles these conditions, enabling you to detect in more locations with a minimum amount of false signals masking target responses.