Minelab Equinox 600 Metal Detector

EQUINOX 800

You asked for more, now you have a more robust and lightweight, not to mention waterproof metal detector that will change the industry.

The crisp LCD display features large Target ID numbers so you can see your target ID at a glance. All of the information you need when detecting is right there in front of you.

Detect Modes and operating frequency can be instantly changed at the push of a button for a dynamic and uninterrupted detecting experience.

Using the EQUINOX 600 user interface, you can:

View the status of your battery and wireless audio device connections.
Create you own notch discrimination patterns to ignore unwanted targets.
Change the operating frequency, Detect Mode, and Sensitivity on the fly.
Activate All-Metal mode to temporarily disable the current discrimination pattern.
Activate Pinpoint mode to zero-in on a promising target so that you know exactly where to dig.
Adjust an array of essential and advanced detecting functions including Noise Cancel, Ground Balance, Volume Adjust, Threshold Level, Target Tone, Accept / Reject and Recovery Speed.

Equinox User Interface

Multi-IQ

Low frequencies give more depth on large targets, and high frequencies are usually more sensitive to small targets.

With EQUINOX you can operate across the full spectrum of frequencies simultaneously for maximum results.

Other Technologies

EQUINOX 600 offers 3 single frequencies of 5, 10, and 15 kHz, giving a 3-times range of 5 to 15 kHz.

Maximum wireless audio compatibility - Connect conventional Bluetooth headphones, high-speed aptX™ Low Latency devices, or the ultra-fast Wi-Stream enabled WM 08 audio module. Wireless headphones and WM 08 Module purchased separately.